2.2 Inch TFT LCD Screen with SPI Interface and 300 Cd/m2 Brightness for Industrial Applications

2.2" Inch Touch Panel Screen 176x220 ILI9225G 300 Cd/m2(nits)

Description

This screen is a 2.2 inch diagonal full color QCIF 170x220 TFT LCD screen display. it is easily controlled by MCU. This 2.2" TFT LCD without touch screen ( optional ) can be used in embedded systems, industrial device, security and hand-held equipment which require display in high quality and colorful image. It supports SPI interface. For easy connection to your host, the FFC/FPC tail mates with easy-to-find Plugging sockets.

Has many optional designs due to the various application environment. it supports EMI testing and severe reliability testing, with and without resistive touch panel, with / without capacitive touch screen, higher brightness up to 1000 nits.

Basic parameters:

Size: The module size is usually approximately 41.7×56.16×3.35 millimeters, and the effective display area is 43.56x34.85 millimeters.
Resolution: The resolution is 176×220 pixels, which belongs to the QCIF level.
Interface: Supports 3-wire SPI and RGB interfaces, which can be conveniently connected to the microcontroller.
Touchscreen: Usually equipped with a resistive touchscreen, there is also a version without a touchscreen available for selection.
Viewing angle: The viewing angle is at the 12 o'clock direction, and the gray-scale inversion occurs at the 6 o'clock direction.
Brightness: The typical brightness value is 200cd/m².
Operating temperature: The operating temperature range is -20℃ to +70℃, and the storage temperature range is -30℃ to +80℃.
Chip characteristics:
Color display: The ILI9225G chip supports 262,144 color display, and rich color performance can be achieved through the γ correction function.
Function integration: Integrates 528 channel source drivers and 220 channel gate drivers, has 87,120 bytes of graphic RAM, and features window address function, vertical line unit scrolling function, and partial driving function, etc.
Power management: Supports low-power operation, with the logic power supply voltage range of 1.6V to 3.3V, and has energy-saving functions such as 8-color mode and standby mode.
Hardware features:
SPI interface advantage: When using the SPI interface, only a few key signal lines such as SCK, MOSI, CS, RS, and RST are required to complete control and data transmission, reducing pin occupation and simplifying circuit layout and PCB design.
High compatibility: Built-in power management unit and level conversion circuit, supports 3.3V or 5V logic levels compatibility, can be adapted to various microcontroller systems, such as C51 series single-chip microcontrollers, STM32 series ARM Cortex-M processors, and Arduino open-source platform, etc

The main applications of this product include the following aspects:

Embedded system: Due to its small size, flexible interfaces, and simple drivers, it is widely used in embedded system development and is an ideal choice for portable devices that require a graphical human-computer interaction interface.
Industrial control: It can be used in industrial control panels to display device status, operation instructions, etc. Resistive touch screens are convenient for operation in industrial environments.
Smart home: It can serve as the display interface for smart home terminals, used to display device status, control menus, etc., to achieve interaction with users.
Teaching experiments: With abundant development materials and a mature and stable technical ecosystem, it becomes a commonly used material for teaching experiments in electronic information courses in universities, helping students learn the underlying hardware driver mechanisms.
Medical instruments: It can be applied to some small medical instruments, such as blood glucose meters and blood pressure monitors, to display measurement data and operation interfaces.
Consumer electronics: In handheld game consoles, MP4 players, electronic dictionaries, and other consumer electronic products, it is used to display images, videos, and operation menus, etc.

FAQ:

1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?

Answer: No problem. Firstly, please kindly send us your specification/ drawing paper

If you have not the specification, you can also provide your samples; we will recommend the suitable one

if it is standard products. Or we can customize for you based on your own requirement.

2.This LCD is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the outline size or display content,

a new LCD glass module is need. We have to open new tooling for you.

3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.

4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size

of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.

5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing paper confirmation and tooling charge payment,

we can report you the exact time when you confirm the drawing paper.

6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.

7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for

special ones, the leading time is about 15-30 days. suppose we can finish earlier, we will report the information in advanced.

Packaging & Shipping:

Packaging: Carton boxess, Cupboard , EPE, Blister Tray, About the package way, it is up to the size of products,

according to customer request and demand. Different countries have not same requirement..

Shipping: Express way as DHL,Fedex,EMS,UPS,air shipping,sea shipping,Any shipping method you prefer.

Payment Method:

2.2 Inch TFT LCD Screen

SPI Interface TFT Display

300 Cd/m2 LCD Module

2.2 Inch TFT LCD Screen with SPI Interface and 300 Cd/m2 Brightness for Industrial Applications Images